K&D Factory Service Inc. has been bringing OEM commercial cooking parts and service to restaurants and commercial kitchens of Red Lion, PA and the surrounding areas since 1945!
Read our reviews and find out why your colleagues consider us to be their nearby commercial cooking supply company in Red Lion, PA.
for Red Lion, PA
Our Reviews by City
Ice Machine Repair. In response to a malfunctioning commercial ice machine, I undertook a detailed repair process in a busy commercial kitchen. The primary issue was identified in the faulty condenser unit, and my meticulous approach involved replacing this critical component. This precision repair not only resolved the problem but also led to the complete restoration of the ice machine's efficiency, ensuring a consistent and uninterrupted supply of ice for the kitchen's needs.
Installed HOB Dishwasher piping assembly, tested and verified vacuum breaker is leaking. Will order new vacuum breaker per Jerry. 3/19/21 Installed vacuum breaker. Ran unit, check for leaks, where none. Operation okay at this time.
Found Mini refrigerator for the McCafe machine compressor very hot and condenser fan motor not running, I checked power on motor and it had correct power, I replaced condenser fan motor from truck stock and waited for unit to come down to temperature, unit is working properly at this time.
Removed and replaced left door on top oven. Set doors for proper closing. **No Charge Travel & Miles and 10 % Discount on Part**
Checked out fryer and found that solenoid for steam release is dirty and sticking. I was able to free the valve and ram a fryer test with product. This time it drained. Will order new solenoid for fryer and return to install. Please Order 1=HEN17121- solenoid valve. regular shipping. 9/24/18 Installed valve tested with product okay.
Checked Chicken Fryer unit, found pump will run but will not even blow bubbles in fry vat. Pulled out filer pan, found paper towel folded up and forced into female fitting. Used my needle nose pliers to reach up inside and pull out blockage. Tested filter, working okay
Found snap ring missing during Tune Up on product nozzle, installed new, now okay