West York PA Commercial Refrigeration

Commercial Kitchen Equipment Repair: Noticing excessive frost buildup in a reach-in freezer, I found a malfunctioning defrost heater. Replacing the heater prevented ice accumulation, optimizing storage capacity and ensuring food remained at safe temperatures.

Commercial Kitchen Equipment Maintenance. I meticulously cleaned refrigeration coils, repaired seals, and replaced filters across all equipment. This service preserved appliance performance and prolonged their lifespan.

Commercial Ice Maker Installation: The client required a new ice maker to meet growing demand. I positioned the unit in their designated space, connected the water and drainage lines, and configured the settings for optimal performance. After testing, the ice maker produced consistent, high-quality ice, enhancing the client's service capabilities.

Commercial Kitchen Equipment Installation - A high-end restaurant needed a wine cooler to store bottles at optimal temperatures. I positioned and installed the cooler, adjusted the humidity and temperature controls, and confirmed proper function. Staff training on storage practices followed, ensuring perfect wine service.

Commercial Kitchen Equipment Repair Service: The client’s commercial dishwasher was not properly dispensing detergent, leading to incomplete washes. I found that the dispenser valve was clogged and the motor was failing. After cleaning the valve and replacing the motor, the machine returned to optimal washing performance.

Commercial Fryer Repair. The fryer in a busy kitchen was generating excessive heat. Our experienced repairman diagnosed the issue as a faulty thermostat. The old thermostat was replaced with a new one, meticulously calibrated for accurate temperature control, guaranteeing consistent and perfectly fried items.

Arrived at location on 7/8/21 - Spoke with manager Kristi, she stated she wanted refrigeration equipment gone over and coils cleaned on reach in coolers and freezers and walk in coolers. Also wanted ice machine cleaned and sanitized. Removed panels from condensing coils cleaned and placed filter material in front of them checked temps and gaskets on doors and hinges ok. Blew out condensing coils on walk in coolers checked electrical components ok. Removed water side of ice machine cleaned and sanitized them and sanitized ice machine head and bin. All ok.

Per customer when GLO Slicer unit moves back & forth it makes a weird noise. Found no noise now. Customer did not hear noise since oiling. Went over unit, sharpened blade. Applied oil where needed. Unit ready to use.